EX-212 Integrated amplifier 2x45W - Wireless

Print
The EX-212 delivers 2x45W RMS of power. It includes a Wireless connexion.

Finishes:
Description
Datasheet Manual Press

This amplifier EX-212 was designed in an audiophile approach to ensure the high fidelity amater a faithful reproduction of his favourite music. It delivers 2x45W RMS into 8Ω.
It includes a WIRELESS interface, allowing you to play music from your Smartphones.

The EX-212 comes with 4 unbalanced audio inputs including a 3,5 mini jack MP3 input, one digital input (coaxial and/or optical) allowing connection to latest generation TV sets.

Finally, it provides a « pre-out » to perform bi-amplification.

 

HIGHLIGHTS
- High quality manufacturing
- Shielded preamplifier
- Large power output amplifier stage for both channels
- Stage power generously dimensioned consequences: ability to drive any kind of speakers (8, 4, 2 Ohms).

- WIRELESS with removable antenna
- Optical and Coaxial digital inputs
- MP3 input 3,5mm
- Headphone output 6.35mm


Included Accessories
1x Detachable IEC power cord
1x Wireless antenna
1x Remote control RC-EX4
2x Batteries
1x Manual


DAC: The S/PDIF input is interfaced to a Cirrus Logic CS8416 chip and analog digital conversion is supported by a PCM1973 circuit from the same manufacturer. Maximum sampling is 24 bits at 96 kHz on the coaxial and optical inputs.

Digital Inputs: The OPTICAL connector will override the source connected to COAXIAL, unless the source connected to the optical connector is turned off. In this case, you can listen to the source connected in coaxial.

  

SPECIFICATIONS
Power: 2x45W RMS into 8 Ω and 2x70W into 4 Ω
Total harmonic distorition < 0,01%
Signal to noise ratio > 100 dBA
Bandwidth: 20 Hz - 20 KHz Speaker
Impedance Compatibility Range: 2-8 Ω

Wireless Range: about 10 m


Connectors
2x RCA line inputs
1x Optical input
1x Coaxial input
1x Phono input
1x Output line
1x Output REC
1x MP3 input (Mini-jack 3. 5 mm)
1x RCA line output: Pre-Out
1x Headphone Jack 6.35 mm in front
1x Wireless antenna
4x Screw terminals compatible with banana plugs

Dimensions (WxHxD): 430x80x365 mm
Weight: 6.2 kg

Finishes:

 

EX212-Front-1000x1000web79
EX212-Front-Top-1000x1000web69
EX212-Rear-1000x1000web33
EX212-Inside-1000x1000web45
RC-EX4-1000x1000web79
EX222-2-04-Antenne-BT-web1000x1000